by Dmitriy Nikitin | Aug 8, 2016 | Applications
The various HMWPE (High Molecular Weight Polyethylene) were sent in for processing with our 20 watt fiber laser. The customer’s logo was generated and lased on all the various color samples and implants using various laser parameters to achieve the best overall...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
These plastic medical parts were marked using a 20 Watt Fiber Laser Marking System.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This titanium sample used 16 watts of power resulting in very high-quality dark marks at 5.98 (larger logo) and 4.21 (smaller logo) cycle times. Technology: Q-switched Fiber Laser, Wattage: 20 Watt Focal Length Lens: 160mm.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The HUB was marked using a 20 Watt fiber laser marking system using a 160 mm lens. The HUB was marked with both bold and narrow fonts as well. The marks done on the hub using a narrow font had a cycle time of 2.35 seconds. The marks done in a bold font had a cycle...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The steel gear was marked using a 20 Watt Q-Switched Fiber Laser with a 160 mm lens. Logo, human-readable characters and their barcode, 2D matrix code were etched on the part using 18 Watts of power, frequency of 25 kHz, and speed of 6″ per second for only one...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Hendricks Motorsports – “In Loving Memory, Papa Joe Hendrick 1919-2004” This part was marked using a 20Watt Fiber Laser Marking System using a 160 mm lens. Since the part was so large, in order to put a mark across the whole part the marking was...
