by Dmitriy Nikitin | Aug 8, 2016 | Applications
The canisters were marked using the 20-watt q-switched ytterbium fiber laser, along with a 160 mm focal length lens. In order to get the marks along the outside diameter of the parts, each part was held in a fixture that allowed for manual rotation. Each part was...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
UID marking was done using a 20-watt q-switched ytterbium fiber laser with a 160 mm focal length lens. The parts were surface annealed, to create brightly contrasting marks. The parts were marked using approximately 18 watts of power, with a frequency of 35kHz, and at...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser marking on steel accomplished using a Fiber Laser
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The Laser marking on this steel was accomplished using a 20 Watt Fiber Laser
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This part was marked using a 20 watt Fiber laser marking system. The part was surface annealed, to remove the black paint and create contrasting marks.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser marking was accomplished using a 20 Watt Fiber Laser
