by Dmitriy Nikitin | Aug 8, 2016 | Applications
The paint was removed from the plastic parts using a 10-watt Fiber Laser Marking System. The parts were marked with the intent to burn away the paint without burning the plastic underneath without causing any of the damage as with the previous application. The paint...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Using our LPQ series fiber laser configured with a 160mm focal length lens and testing various parameters, the automotive bearing was surface marked with 18 watts of power at 80 kHz and 4 inches per second. The total cycle time for the marks as shown was 6.82 seconds....
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser markings on steel
by Dmitriy Nikitin | Aug 8, 2016 | Applications
UID marking on the part was accomplished using a 20 Watt Fiber Laser Marking System with a 160mm lens. The 160mm focal length lens has a working distance of 176mm from lens to part. A light square box was marked first; the 2D code was marked over the box. The first...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked with a 20-watt q-switched ytterbium fiber laser marking machine and a 160 mm focal length lens. The parts were surface etched to remove a layer of material and create a brightly contrasting mark. Process Parameters: Material: White Zirconia...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser marking on steel accomplished using a Fiber Laser
