by Dmitriy Nikitin | Aug 8, 2016 | Applications
This part was marked using a 20 watt Fiber laser marking system. The part were surface annealed, to remove the black paint and create contrasting marks.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Marks done with a speed of 250 mm/sec were done in 59.43 seconds (15 passes). Marks done with a speed of 600 mm/sec were done in 58.91 seconds (25 passes). Technology: Q-Switched Fiber Laser Wattage: 20 Watt Wavelength: 1060nm – 1070nm Focal Length Lens: 160mm...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This titanium sample used 16 watts of power resulting in very high-quality dark marks at 5.98 (larger logo) and 4.21 (smaller logo) cycle times. Technology: Q-switched Fiber Laser, Wattage: 20 Watt Focal Length Lens: 160mm.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The HUB was marked using a 20 Watt fiber laser marking system using a 160 mm lens. The HUB was marked with both bold and narrow fonts as well. The marks done on the hub using a narrow font had a cycle time of 2.35 seconds. The marks done in a bold font had a cycle...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The steel gear was marked using a 20 Watt Q-Switched Fiber Laser with a 160 mm lens. Logo, human-readable characters and their barcode, 2D matrix code were etched on the part using 18 Watts of power, frequency of 25 kHz, and speed of 6″ per second for only one...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Hendricks Motorsports – “In Loving Memory, Papa Joe Hendrick 1919-2004” This part was marked using a 20Watt Fiber Laser Marking System using a 160 mm lens. Since the part was so large, in order to put a mark across the whole part the marking was...
