by Dmitriy Nikitin | Aug 8, 2016 | Applications
UID marking was done using a 20Watt Fiber Laser Marking System. A dark mark was placed on the part. The 2D code and text were marked on the locations illustrated in the drawing supplied with the sample part. The 2D code had a cycle time of 6.21 seconds while the text...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser Marked Harley Davidson Motor Cycles Logo Laser etching was done on the chrome piece (gas tank cap) without going through the chrome. The Harley Davidson logo was marked on the top of the rounded parts using a 20-watt Q-switched Fiber laser with a 160...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked using a 20Watt Fiber Laser System and a 160 mm focal length lens. The parts were marked per the spec attached to the application. The parts were marked with an arrow along with a Julian date code and plant code. The marking was aligned with the...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser marked steel, accomplished using a Fiber Laser
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked using a 20Watt Fiber Laser Marking System using a 160 mm lens. The part was marked with both a light etch and a dark surface mark. The light etched marks had a cycle time of 0.275 seconds and the dark surface marks had a time of 1.86 seconds. If...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Process Parameters: Black Anodize Material: Black Anodized Power: 12 Watt The method used: Etch Frequency: 30 kHz Depth: Surface Speed: 15 inch/sec Laser Type: Q-Switched Fiber Laser Focal Length Lens: 160mm Cycle Time: 3.4 seconds The parts were laser marked with a...
