by Dmitriy Nikitin | Aug 8, 2016 | Applications
Marking: Teflon Coated Steel – Clutchtex Clutch The part was marked using a 20-watt q-switched ytterbium fiber laser with a 160 mm focal length lens. The metal oxide part was surface etched, to create brightly contrasting marks. The part was marked using...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The Laser marking on this brass part was accomplished using a 20 Watt Fiber Laser
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This part was marked using a 20 watt Fiber laser marking system. The part was surface annealed, to remove the paint and create contrasting marks.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Material: Anodized Aluminum Power: 9 Watt Method used: Etching Frequency: 30 kHz Depth: Surface Speed: 20 inches per second Laser Type: Q-Switched Fiber Laser Focal Length Lens: 160mm (170mm WD) Cycle Time: 2.47 Seconds Sample was marked with the 20 Watt Fiber Laser...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
UID markings were marked with a 20Watt Fiber Laser Marking System using a 160 mm lens. The part was marked with multiple etched marks of 2D codes and squares. The cycle time for the 2D code was 3.28 seconds. Two different squares were marked on the part with different...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked with a 20-watt q-switched ytterbium fiber laser and a 160 mm focal length lens. The parts were surface etched to remove a layer of material and create a brightly contrasting mark. Process Parameters: Material: Carbide Power: 8 Watts Method used:...
