by Dmitriy Nikitin | Aug 8, 2016 | Applications
This part was marked using a 20 watt Fiber laser marking system. The part was surface annealed, to remove the black paint and create contrasting marks.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
All samples were marked with the 20 Watt Fiber Laser Marking system using a 160 mm lens. Characters 0.070” tall were marked on all samples. Annealing was used to create the marks on Samples 1 and 2. The surface etching was used to mark Sample 3. Sample 2 was marked at...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked using a 20-watt q-switched ytterbium fiber laser marking system with a 160 mm focal length lens. The 160mm focal length lens has a working distance of 176mm from lens to part. 10 watts of power were used to mark the sample, with a frequency of 35...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
These parts were marked using a 20 watt Fiber laser marking system. The parts were surface annealed, to remove the black paint and create contrasting marks.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser marked stainless steel
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The Application was done with a low power laser system in the Application Testing & Research Lab. The recommendation for this process would be for a minimum of 100watt laser for projected cutting speeds of 1mm per second. The Clear Acrylic can be processed at a...
