by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked using a 20Watt Fiber Laser Marking System with a 160mm lens. The 160mm focal length lens has a working distance of 176mm from lens to part. Two different logos were marked on the samples on each end. The main logo had a cycle time of 1.67...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked using a 20 Watt Q-Switched Fiber Laser with a 160 mm lens. The handles were marked inside of the requested area designated with a pink box. The parts were tested for contrast, but some of the plastics did not produce a contrasting mark. The...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The plastic cover was laser marked with a 20-watt q-switched ytterbium fiber laser with a 160 mm focal length lens. The part was marked with both a barcode along text. The marking was made to show the feasibility of the laser and to imply a typical cycle time and what...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser marking glass with a company logo onto a finished piece of glass using Thermark spray. The result was clean and professional.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This medical part was laser marked using a 20 Watt Fiber Laser.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This stainless steel medical part was laser marked using a 20 Watt Fiber Laser Marking System.
