by Dmitriy Nikitin | Aug 8, 2016 | Applications
The Hasselalloy-Nickel based bracket and Grommet were marked using a 20 Watt Q-Switched Fiber Laser with a 160 mm lens. The parts were annealed using 18 Watts of power, frequency of 35 kHz, speed of 5″ per second. 2D matrix code was read in the lab with a Symbol...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser marked steel
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Stainless steel parts were marked with a 20-watt q-switched fiber laser with a 160 mm focal length lens. The parts were deep engraved using 18 watts of power, a frequency of 20 kHz, and a speed of 5″ per second. The stamp marks on the samples the customer sent...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Sample ceramics marking application. The sample marked extremely well with the 20-watt Fiber Laser Marking System.
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This steel medical part was laser marked using a 20 Watt Fiber Laser. Medical Device Marking: Process Parameters: Material: Steel Power: 20 Watt Method used: Surface Etch & Anneal Frequency: 20 & 80 kHz Depth: Surface Speed: 5 inches per second Laser Type:...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked using a 20-watt q-switched ytterbium fiber laser with a 160 mm focal length lens. The samples were etched with the information provided by the customer.
