by Dmitriy Nikitin | Aug 8, 2016 | Applications
The various HMWPE (High Molecular Weight Polyethylene) were sent in for processing with our 20-watt fiber laser. The customer’s logo was generated and lased on all the various color samples and implants using various laser parameters to achieve the best overall...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Blue leather with 3-mm thickness was marked and cut by a 10 watt CW CO2 laser with a 3.75-inch focal length lens. The speed of 50 mm/sec was used for etching surface with one pass and the speed of 10 mm/sec was set for cutting through the sheet with three passes....
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Laser marking on steel accomplished using a 20 Watt Fiber Laser
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The samples were marked with a 10-watt q-switched ytterbium fiber laser with 160 mm focal length lens. They were surface etched, to create brightly contrasting marks. The parts were marked at a speed of 10 inches per second, using about 7 watts of power, with a...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The anodized aluminum key chains were marked with the 10 watt q-switched ytterbium fiber laser. All samples marked extremely well. The cycle time for marking the words Laser Photonics was 2.75 seconds. The parts were marked using 60% power. A 160 mm focal length lens...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This part was marked with a 10 watt q-switched ytterbium fiber laser and 160 mm focal length lens. The 160mm focal length lens has a working distance of 176mm from lens to part. The part was surface marked to create contrast on the sample. The plastics sample was...
